Inset Crystal Belt – Made with SWAROVSKI® ELEMENTS

Tiny crystal squares recessed into the leather creates a subtle, sophisticated accessory.

Jazz up your wardrobe and add a touch of glamour to your look!

Exclusively made with SWAROVSKI® ELEMENTS.

Our exclusive products are handmade in England from superior quality bridle leather and lined with soft Italian clothing leather for extra comfort and a luxurious finish.

Every purchase comes with a full written guarantee setting a benchmark for our high quality. We also offer a lifetime repair service in the unlikely event it should ever be needed.

See below for size information




Please measure your correct size accurately wearing the type of garments with which you intend to wear the belt.

Garments,  whether standard, high or low waisted, and the thickness of the material can make a considerable size difference to the belt fitting you require.

If you require a custom size please use the custom option and see the How To Measure instructions below. Belts cannot be returned due to incorrect measurement.

Some colours offered are not shown. Please contact us if you would like to see a sample.

Belt Size Width in Inches Width in Centimetres Fits in Inches Fits in Centimetres
XS  1⅛” 30mm  28″ – 32″  71- 85cm
S 1⅛” 30mm  30″ – 34″  76 -86.5cm
M 1⅛” 30mm  32″ – 36″  82.5 – 91.5cm
 L 1⅛” 30mm   34″- 38″  86.5 – 96.5cm


To ensure you order the correct  size please use this easy to follow guide:

1) Using one of your own belts that fits you comfotably,  place it on the type of garments you intend to wear and note which hole is the comfortable fit.

2) Take the belt off and lay it flat.

3) Use a taut tape measure or ruler: start your measurement including buckle and measure straight down to the hole you noted.

4) If you want to wear the belt on high-wasted and/ or low-wasted garments take your measurements wearing appropriate garments. Select the mid-point as the size to order.

This measurement tells you the best size. If you would like the fit to be slightly looser or tighter, add or subtract a little accordingly.

Compare this measurement to the size chart and select the size that will provide a fitting near the middle..

As an example, this diagram shows the belt is a comfortable fit on the second to the last hole. The measurement is taken from the top of the buckle to the worn hole.


If you select a custom fit with 5 holes we will make the sizing so that your measurement fits the middle hole of 5.

Alternatively,  you can choose to have just 3 holes, making the comfortable fit to the centre hole of 3, with extra crystal covering the space where the other 2 holes would normally be maximizing the amount of crystal that is seen.

N.B. Diamond Dogs (U.K.) Ltd. cannot be held responsible for any measurement you provide. Custom made belts are non-refundable. Please provide your correct measurement taken according to our instructions. The entire length of your belt or any other measurement is irrelevant.


Your purchase comes complete with a care and guarantee booklet. Please take a moment to read the care instructions before using the item. You will also find more advice in our short ‘How To’ videos found in Useful Links at the bottom of the page, which provide all the necessary information to ensure you enjoy a very long life for your Diamond Dogs’ purchases.


UK orders which are in stock ship within 48 hours via Royal Mail Special Delivery. All others ship via FedEx on a signed for service. Out-of-stock items or custom orders take between 2 – 6 weeks to be made. Please be patient – our handmade items cannot be rushed.

You may also like…